We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Broad Disc.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Broad Disc(0.2) - List of Manufacturers, Suppliers, Companies and Products

Broad Disc Product List

1～15 item / All 15 items

Displayed results
0094 Prevention of bridging in crushed wood biomass fuel

0094 Prevention of bridging in crushed wood biomass fuel

This is an introduction to a case study on preventing bridging in crushed wood biomass fuel.

We have numerous Bro Disks used for preventing bridging in material hoppers for wood biomass fuel. In the biomass sector, we also have a significant track record of usage in various types of powder, granule, and pellet tanks. When bridging occurs around receiving hoppers, storage silos, or conveying and weighing devices with these materials, the unique functionality and low-cost Bro Disk is the optimal solution. This will help gain understanding from stakeholders and related parties. 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign material contamination, as strength and durability are crucial. Our silicone disks are exceptionally strong and durable. Once you use them, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. If you are facing issues with powders and granules, please feel free to consult us. We have many case studies published on our website. You can check them out through the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
At the hopper for supplying wallpaper crushing products.

At the hopper for supplying wallpaper crushing products.

The subject is the powder of crushed wallpaper! Here is an example of installing a blow disk at the bridge generation point.

Although there is an agitator in the hopper to prevent bridging, we have improved the issue of bridging occurring in areas that it cannot reach. The process for implementation began with reviewing the hopper diagram and contents, followed by conducting tests using four "Standard Blowing Disks." The test results were favorable, and we adopted the "Controller (C-SV1)" with one built-in solenoid valve. 【Overview】 ■ Target material: Powdered wallpaper scraps (appearance is cotton-like), bulk density is about 0.2 ■ Hopper: 800×800, 2 vertical sides, 2 inclined sides ■ Discharge device: Screw feeder ■ Mixer: Located near the center of the hopper ■ Situation: Bridging between the mixing blades and the screw feeder ■ Countermeasure: Installation of blowing disks at the bridging area mentioned above (2 disks per inclined side, totaling 4 disks) *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0282 Bridge measures for carbon black

0282 Bridge measures for carbon black

Introducing a case study of the Brody disk adopted by an automotive parts manufacturer.

We received an inquiry from an automotive parts manufacturer regarding carbon black (particle size 10-20μm) getting clogged in a small hopper using lab-scale equipment. The hopper diameter is 450mm, and the discharge port diameter is 50mm. We proposed installing a total of four Brody Disk Minis in two tiers, with two units each, and they were installed successfully. The results, of course, were excellent. Since carbon black is used in various applications, if you are experiencing similar bridging phenomena or clogging with similar materials, please consider our equipment for its functional and economical benefits. *For more details, please refer to the PDF materials or feel free to contact us. *We have published numerous case studies on our website. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0502 Prevention of Iron Oxide Powder Bridging

0502 Prevention of Iron Oxide Powder Bridging

The discharge diameter is φ1000, and since the circumference is large, the blow disks are installed in two tiers with a slight height adjustment for the four pieces!

We would like to introduce an inquiry we received from a customer stating, "We would like to install a blow disk in conjunction with the modification of the discharge section of the existing silo." The silo has a diameter of φ2000, and a vibro activator was used for discharge. However, due to certain circumstances, the customer requested to remove this discharge device and place our blow disk above it. Since the discharge diameter is φ1000 and the circumference is large, it was decided to install 8 blow disks (in practice, 4 disks will be placed in two tiers with slightly different heights). 【Case Overview】 ■ Name: Iron Oxide ■ Bulk Density: 1.2 ■ Angle of Repose: 50° ■ Adhesiveness: Yes 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. Our silicone disks are exceptionally strong and durable. Once you use them, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller ready. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0223 Prevention of Carbon Black Bridging

0223 Prevention of Carbon Black Bridging

Easily solve powder bridges that cannot be resolved with knockers or vibrators!

We received an inquiry from a dust collector manufacturer. In planning new equipment, the user requested "as many measures as possible," and they considered the use of a Brodisk. It has now been adopted and is in operation, and we have received feedback that it has been running without any issues. We can provide clear guidance on the selection of Brodisk models, installation locations, and operating methods according to the customer's conditions. [Overview] ■ Material Name: Carbon Black (Product Name: Niteron) ■ Hopper Diameter: 1800φ ■ Hopper Discharge Diameter: 250φ * For more details, please refer to the catalog. Feel free to contact us with any inquiries. * Our website features numerous case studies, which you can check via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0225 Introduction of PVA chip into the silo

0225 Introduction of PVA chip into the silo

Easily solve powder bridges that cannot be resolved with knockers or vibrators!

The equipment has been introduced at a major chemical company's facility. Originally, a knocker was installed in the silo for PVA chips, but to stabilize the discharge, this device was introduced only near the silo outlet. It was delivered in line with the regular maintenance period and installed. 【Overview】 ■ Outlet diameter: 300A ■ Silo cone angle: 60° ■ Temperature: Room temperature ■ Gas used: Nitrogen gas * The blow disk can be used without compressed air; inert gases and others can also be used without issue. If you have any problems related to the discharge of powder and granular materials, please consult us. Based on various experiences, we can provide reasonable countermeasure proposals. * For more details, please refer to the catalog or feel free to contact us. * Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eliminate the bridge of the hammer mill raw material hopper.

Eliminate the bridge of the hammer mill raw material hopper.

Easily solve powder bridges that cannot be resolved with knockers or vibrators!

We received your message stating that after changing the raw material hopper (grinder) of the hammer-type sample mill to a larger type, a bridge has started to occur. Even though it is referred to as a large type hopper, it is for sample use, so its capacity is below 30L. By installing four small Brody disk minis among the Brody disks, we were able to resolve the issue. 【Overview】 ■ Hopper diameter: 320φ ■ Material: Inorganic compound, specific gravity around 3 ■ Two conical hoppers of different heights, totaling four installed 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared. *For more details, please refer to the catalog or feel free to contact us. *Our website features numerous implementation examples, which you can check via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example of installation in a resin powder storage bunker.

Example of installation in a resin powder storage bunker.

Introducing examples of continued adoption by resin material manufacturing companies.

At the resin raw material manufacturing company, to promote discharge from the bunker, a "blow disk" was adopted near the discharge outlet located at the bottom of the silo (conical part, midway). This time, we were consulted about installing this equipment in the area opposite the discharge outlet, as the powder there was not moving and was piling up like a mountain, in order to effectively utilize the bunker’s volume. We communicated that completely eliminating the pile was difficult and presented a proposal for installation. It was later decided to implement the solution, and the results have improved to a level acceptable to the customer. [Overview] ■ Material: Resin powder (prone to clumping) ■ Bunker capacity: 200m3 * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduced into the 70 cubic meter fly ash silo.

Introduced into the 70 cubic meter fly ash silo.

Based on our experience, we will provide you with reasonable models, quantities, and installation locations, including costs.

We received an order for the introduction of a Broady Disk from an engineering company. The outline of the introduction is as follows: ● Contents 　　Fly ash ● Silo diameter 　　φ3000 ● Discharge outlet diameter 　　φ300 ● Installation positions 　(1) Four units, 200mm above the discharge section along the wall 　(2) Four units, 500mm above the discharge section along the wall 　(3) Eight units, 950mm above the discharge section along the wall 　(4) Eight units, 1550mm above the discharge section along the wall ● Air aeration sequence 　　Four units from (1) ⇒ Four units from (2) ⇒ Four units from the eight in (3) 　　　⇒ Remaining four units from (3) ⇒ Four units from the eight in (4) 　　　⇒ Remaining four units from (4) ⇒ ... repeat 　・The Broady Disk does not require a continuous flow of air. 　・Air will be supplied intermittently using a timer and solenoid valve. 　・Generally, a short burst of air lasting a few seconds is effective. For more details, please refer to the catalog or feel free to contact us. *Our website features numerous implementation examples. 　You can check them via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Powder Supply Device
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Elimination of the bridge of ceramic fine powder 0293

Elimination of the bridge of ceramic fine powder 0293

Introducing examples adopted for bridge prevention in the hopper section of existing dust collectors.

This is an introduction to a case where "Brodisk" was adopted as a solution to bridge issues in the hopper section of an existing dust collector. The material is ceramic powder, with a particle size that is quite fine, resulting in very poor flowability. Before the introduction of this equipment, the hopper walls were being tapped, which caused them to become uneven. After repairing that area and installing the "Brodisk," we received feedback from the user that bridging no longer occurred. 【Overview】 ■ Dust collector hopper dimensions: 2500×2500 ■ Powder overview: Ceramic fine powder (dust), particle size: 1–10μm *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0245 Installation to the hopper of the metal powder screw feeder.

0245 Installation to the hopper of the metal powder screw feeder.

Introducing a case of installation in a hopper of a screw feeder for metal powder.

In the metal powder hopper, we installed a conical shape inside to reduce the powder pressure to prevent bridging, but it did not improve. We received an inquiry about trying a Brodie disk. The customer expressed a desire to borrow it, stating, "I would like to avoid installing it suddenly (as it requires drilling a hole in the hopper), and first, I want to check the actual item." Therefore, we attached the Brodie disk to a resin plate that simulated the hopper wall and sent it. The customer connected the air and confirmed the air discharge. After embedding it in the powder inside the hopper and confirming the air discharge in that state, they decided to adopt it. Since then, they have evaluated that it is operating stably. 【Overview】 ■ Material: Metal powder (particle size: unknown) ■ Bulk density: Approximately 2.5 ■ Hopper size: 1300×2000 * For more details, please refer to the catalog or feel free to contact us. * Our website features numerous examples of implementations. You can check them from the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improvement of poor discharge of crushed gypsum board.

Improvement of poor discharge of crushed gypsum board.

Introducing a case of Brodisk that solved the discharge issues of mixed recycling material equipment.

This is a case where we were consulted about whether we could improve the discharge issues from the gypsum board crushing product tank using a blow disk in a recycling material mixing facility. It seems that problems are particularly severe during the rainy season, and this equipment was installed before the rainy season. As a result, there were no troubles as in previous years, and the equipment operated smoothly during the rainy season. [Overview] ■ Hopper size: 1500×2500 ■ Discharge section: 300×1500, cut out by screw ■ Blow disk operation method: - The controller, which has 6 solenoid valves built in, sequentially turns on air for a total of 12 blow disks divided into 6 locations with 2 disks each. This equipment easily resolves bridging and clogging of bulk materials through air aeration inside the hopper and vibration of the silicone disk. * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous implementation examples, which can be checked via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0288 Promoting the outflow from the hopper of PP crushed products.

0288 Promoting the outflow from the hopper of PP crushed products.

Introducing examples of Brody disks adopted by facilities manufacturing resin containers.

This is a project at a facility that manufactures resin containers. They consulted us about issues with bridging and clogging in the hopper due to the type of raw materials and grinding conditions, and they wanted to improve this. Reducing discharge time was also one of their goals. The hopper size is relatively large, and we recommended installing 12 standard-type blow discs, which they decided to implement. After the installation of this equipment, all material-related troubles have been resolved! 【Overview of Conditions】 ■ Hopper Overview - Square pyramid hopper 1900*1900 ■ Blow Disc Installation Overview - For one inclined surface: 1 unit on the lower level and 2 units on the upper level, totaling 3 units ⇒ Total of 12 units ■ Operating Method - A controller with 6 built-in solenoid valves sequentially turns on air for 2 blow discs at 6 locations. The order prioritizes the lower level. *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0597 Eliminate the pigment fine powder bridge in one shot.

0597 Eliminate the pigment fine powder bridge in one shot.

We have solved the bridging phenomenon that occurs in the hopper of the quantitative supply screw feeder in one go!

We received a contact from a customer stating, "The air knocker and air vibrator are ineffective, so I would like to install the 'Brodisk.'" After providing guidance on the installation, the device was introduced, and the results have been very favorable, receiving high praise. In this case, the customer purchased the equipment immediately after the inquiry, but we offer free lending of our products. You can first try out the effectiveness of this device. Please feel free to take advantage of this. 【Introduction Overview】 ■ Issue: Suppression of the bridging phenomenon occurring on the screw ■ Contents: Pigment fine powder ・ABD: Approximately 0.3, angle of repose: Approximately 50°, adhesion: Yes ■ Hopper: 500×500 (2 vertical sides, 2 inclined sides) ■ Quantity: 1 unit on each inclined surface, totaling 2 units installed ■ Arrangement: The 2 units are at the same height, each offset from the center to the left and right *For more details, please refer to the PDF document or feel free to contact us.

  • Mixer/agitator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
0376 Prevention of clogging in powdered activated carbon

0376 Prevention of clogging in powdered activated carbon

Introducing a case where a blow disk was installed in the powder activated carbon feeding hopper with two lines.

This is a case adopted by a facility primarily producing functional resin products. There are two lines with hoppers, and one line has a significantly small discharge diameter from the hopper, which increased the risk of bridging. After hearing the details, we provided a countermeasure proposal, which was immediately implemented. Since the installation of this equipment, we have received feedback that bridging and blockages have not occurred. 【Overview of Bro-Disk Arrangement】 ■ Line 1 - Four Bro-Disks arranged on the circumference 200-300mm above the discharge section ■ Line 2 - Four Bro-Disks arranged on the circumference 200-300mm above the discharge section - Four Mini Bro-Disks arranged on the circumference 100-200mm above the discharge section *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be accessed via the link below.

  • 2.png
  • 3.jpg
  • 4.png
  • Other powder equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Broad Disc

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.